Performance description

100 ohm, 250MHz, 23AWG;

Conforms to: TIA/EIA568B, EN50173-1 and ISO11801:2002.

advantage

Reverse the aluminum foil shielding layer to ensure shielding layer termination.

The cochlear technology ensures good shielding effectiveness when bending.

Application scope

The six class /D level and vertical wiring;

It is suitable for electromagnetic interference environment and high requirement for data transmission security.

High transmission rate network applications: Gigabit Ethernet, 10/100BaseT and so on.

Product characteristics

1. performance is better than ISO11801-2002, TIA/EIA568C.2 and GB50311-2007 six standards.

2. with backward compatibility, it can be downwards compatible with CAT5e and lower class systems to avoid user investment losses.

3. low transmission delay, compact cable design, reduce the cable twisting and tying phenomenon in installation.

4. The center PE cross skeleton ensures that the twisted-pair strand is not destroyed in the installation process to the greatest extent. It has high anti-electromagnetic interference and lowers the bit error rate of the transmitted signal to the lowest degree.

5. built in tear rope for easy construction

6. The outer sheath of the cable is marked with trademark, cable number, cable category, wire gauge, fire prevention grade, standard, meter number, batch number at intervals.

7. inside the outside, the carton is packed and the outer box is marked with a certificate.

8. On-line control eccentricity instrument, on-line spark detector, on-line water capacitance detector and other on-line equipment are used in the production process of insulated single wire to ensure the high reliability and consistency of the product. The color bar color mark used in insulated single wire meets the requirements of environmental protection.

9. All materials made of copper, PE and PVC have been tested and analyzed. The content of radioactive and harmful heavy metals has been completely controlled in strict international standards.

10. insulating material is high density polyethylene (HDPE).

11. the outer sheath material can be selected with different flame retardant grade materials.

12. through the third party authority inspection, obtains the UL authentication [1]

Electrical properties

1. working capacitance: less than 5.6nF/100 meters.

2. line to ground capacitance imbalance: less than 330pF/100 meters.

3. rated transmission rate (NVP):65%

4. line to delay difference: less than 45ns/100 meters

5. maximum conductor DC resistance:

7.32 m /100 m (23AWG)

6. wire to DC unbalanced resistance: less than 2%

7. minimum insulation resistance (M /Km):5000

physical characteristics

1. transmission bandwidth is greater than 250MHz

2.23AWG wire gauge

3. the length of the whole box is 305 meters long.