Performance Features
● It is driven by low speed DC motor with low noise.
● Built-in anti-collision reset device, even if it is accidentally bumped, it will not hurt the car and affect the normal use of the parking lock.
● Adopt worm gear and worm drive. The load is light, which increases the life of the animal battery.
● In order to ensure the stability and service life of the product, the company installed rolling bearings at all rotating parts to reduce friction. Make the lifting more smooth.
● With low voltage automatic unlocking function, it avoids the trouble of manual unlocking when there is no power, and is equipped with a low battery charging reminder indicator. When the red light is on, please charge it in time.
● It has the function of rising the resistance and automatically falling back, not hurting the car, and avoiding the parking lock to force the car chassis.
● It has the function of stopping the resistance and stopping automatically, avoiding the pinch of the parking lock.
● The parking lock housing, bottom plate and gland are made of high quality aluminum alloy die-cast. Beautiful appearance. Never rust.
● Withstand voltage design, it can withstand the rolling of cars under 3 tons without deformation.
● It is not easy to fade after using sneeze treatment of imported raw materials.
● Highly sensitive micro switch, safe and reliable, with a service life of 1 million times.
● It adopts imported microprocessor and IC circuit for intelligent control, with low static power and more reliable performance.
● It can be waterproof and soaked no more than 5cm, which is suitable for all-day operation environment.
● The whole machine is screwed for easy disassembly and maintenance.
● Exquisite parking spaces show the owner's glory status and ownership of the parking space.
Z-A basic technical parameters
1. Power supply voltage: DC12V
2, working current: ≤ 3A
3, remote control distance: ≥ 10 m
4, the arm running time: ≤ 5S
5, the use of ambient temperature: -10 ~ 70 ° C
6. Ambient humidity: 95%
7, the host size: 270mmX210mmX85mm
8, the arm width: 480mm
9, the height of the arm: 400mm
10, weight: about 8KG
11, package size: 510mmX430mmX100mm
12, waterproof performance: IP34
13, anti-collision performance: with this function
14, overload protection: with this function
15, service life: ten years under normal conditions
16, remote control battery: 12V (23A or 27A)
RS485 Interface Specification
The RS485 interface is based on the ADM2483 chip design, which uses isolated power supply and adopts perfect anti-static and lightning protection measures. The ADM2483 is an isolated RS485 transceiver from ADI that integrates ADI's patented icoupler isolation technology, which is equivalent to integrating three single-channel optocouplers and one RS485 transceiver at 500Kbps. . This interface can pass IEC61000-4-5, Level 4 standard: 1.2/50us 4KV 10/700us 6KV 8/20us 2KA
The upper node controller and the parking lock controller must comply with the following RS485 communication protocol:
Baud rate: 2400
Data bits: 8
Check digit: no
Stop bit: 1
The node controller sends the data stream format as follows:
E8H
Parking lock controller address
31H
Length 0001H
Content
CRC16
E6H
●; Start: E8H
●; End: E6H
●; Address: 8 digits, of which the lower 5 digits are valid (the bus can hold up to 32 parking spaces)
●; “Content”Description
0x00— lower the parking lock
0x01— raise the parking lock
